Enhanced C1 (C1E) [Auto]

When set to [Auto], the BIOS will automatically check the CPUÕs capability to enable the C1E support. In C1E mode, the CPU power consumption is lower when idle. This item appears only when you install a processor with the Enhanced C1 feature.

Configuration options: [Auto] [Disabled]

Execute Disable Bit [Enabled]

When disabled, the processor forces the XD feature flag to always return 0. Configuration options: [Disabled] [Enabled]

Intel(R) SpeedStep Technology [Auto]

Allows you to use the Enhanced Intel SpeedStep¨ Technology. When set to [Auto], you can adjust the system power settings in the operating system to use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.

Configuration options: [Auto] [Disabled]

Hyper-Threading Technology [Enabled]

Enables or disables the Intel¨ Hyper-Threading Technology feature. Configuration options: [Disabled] [Enabled]

4.4.6Chipset

Phoenix-Award BIOS CMOS Setup Utility

Advanced

 

Chipset

Select Menu

 

 

 

 

 

 

 

 

 

 

LDT Frequency

[

4x

]

Item Specific

Help

Memory Timing

Configuration

 

 

 

 

 

 

Press [Enter]

to set.

 

 

 

 

 

 

F1:Help

↑↓

: Select Item

-/+:

Change

Value

F5: Setup Defaults

ESC: Exit

→←

: Select Menu

Enter:

Select

Sub-menu

F10: Save and Exit

 

 

 

 

 

 

 

LDT Frequency [4x]

Sets the Lightning Data Transport (LDT) frequency multiplier. Configuration options: [1x] [2x] [3x] [4x] [5x] [3.5x]

4 - 30

Chapter 4: BIOS setup