Asus P5PE-VM ATX12V, ATXPWR, P5PE-VMATX Power Connector, Chapter 1: Product introduction, otherwise, the system will not boot up

7. ATX power connectors (20-pi n ATXPWR, 4-pi n ATX12V)

These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

•Do not forget to connect the 4-pin ATX +12 V power plug;otherwise, the system will not boot up.

•Use a PSU with a minimum power rating of 300 W on this motherboard. Use of a PSU with a higher power output is recommended when configuring a system with more

power‑consuming devices. The system may become unstable or may not boot up if the power is inadequate.

P5PE-VM

	ATX12V			ATXPWR
+12VDC		+12VDC	+12.0Volts		+5.0 Volts
GND		GND
			+5V Standby		+5.0 Volts
			Power Good		-5.0 Volts
			Ground		Ground
			+5.0 Volts		Ground
			Ground		Ground
			+5.0 Volts		Power Supply On
			Ground		Ground
			+3.3 Volts		-12.0Volts
			+3.3 Volts		+3.3Volts

P5PE-VM ATX Power Connector

1-28 Chapter 1: Product introduction