2.4.3 Onboard Devi ces Confi gurati on

Onboard AC’97 Audio

[Auto]

Onboard LAN

[Enabled]

Onboard LAN Boot ROM

[Disabled]

Serial Port1 Address

[3F8/IRQ4]

Parallel Port Address

[378]

Parallel Port Mode

[ECP]

ECP Mode DMA Channel

[DMA3]

Parallel Port IRQ

[IRQ7]

Onboard AC’97 Audi o [ Auto]

When set to Auto, the BIOS detects whether you are using any audio device. If an audio device is detected, the onboard audio controller is enable; if no audio device is detected, the controller is disabled. Configuration options: [Auto] [Disabled]

OnBoard LAN [Enabl ed]

Allows you to enable or disable the onboard LAN controller. Configuration options: [Disabled] [Enabled]

Onboard LAN Boot ROM [Disabled]

Allows you to enable or disable the boot ROM in the onboard LAN controller. This item appears only when the Onboard LAN item is set to Enabled. Configuration options: [Disabled] [Enabled]

Seri al Port1 Address [ 3F8/I RQ4]

Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Parall el Port Address [ 378]

Allows you to select the Parallel Port base addresses.

Configuration options: [Disabled] [378] [278] [3BC]

Parall el Port Mode [ECP]

Allows you to select the Parallel Port mode.

Configuration options: [Normal] [Bi-directional] [EPP] [ECP]

ECP Mode DMA Channel [DMA3]

Appears only when the Parallel Port Mode is set to [ECP]. This item allows you to set the Parallel Port ECP DMA.

Configuration options: [DMA0] [DMA1] [DMA3]

Parallel Port IRQ [IRQ7] Configuration options: [IRQ5] [IRQ7]

2-20

Chapter 2: BIOS setup