Configuring EZ Backup

This mode allows one hard disk to backup the other hard disk automatically. The special design can save your vital data even if one hard disk damaged.

• It is recommended using two new hard disks for this setup.

• All original data of the hard disk connected to the SATA_E2 (white, port 1) connector on the motherboard will be erased for this setup. Make necessary backup before the setup.

To start EZ Backup configuration:

1.Click EZ Backup from the main screen.

2.Click Apply to start configuration.

3.Enter the default user name (asus) and password (admin). Click Ok to continue.

Check the Change password box to change the password.

4.A warning message appears, reminding you that all original data in the hard disk connected to the SATA_E2 (white, port 1) connector on the motherboard will be erased. Click Ok to continue.

5.The setup is completed.

6.The Drive Xpert icon on the Windows® notification area turns green to indicate that

EZ Backup is set up successfully.

4-40

Chapter 4: Software support