Using Drive Xpert funcition in BIOS setup environment

You may use Drive Xpert function in BIOS setup environment. Enter BIOS setup by presssing DEL key after powering on. Go to Advanced menu, select Onboard Device Configuration, then press <Enter>.

 

 

 

BIOS SETUP UTILITY

 

 

Advanced

 

 

 

Onboard Device Configuration

 

 

 

 

 

 

 

High Definition Audio

[Enabled]

 

Front Panel Type

[HD Audio]

 

Marvell IDE

[Enabled]

 

PCIE IDE Boot ROM

[Enabled]

 

Marvell LAN1

[Enabled]

 

LAN Boot ROM

[Disabled]

 

Marvell LAN2

[Enabled]

 

LAN Boot ROM

[Disabled]

 

Agere Firewire 1394

[Enabled]

 

 

Drive Xpert Mode Update

[Mode change]

 

 

Update to Super Speed

[Press Enter]

 

 

Update to EZ Backup

[Press Enter]

 

 

Update to Normal Mode

[Press Enter]

 

 

Serial Port1 Address

[3F8/IRQ4]

Enable or Disable High Definition Audio Controller

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.

Drive Xpert Mode Update [Current setting]

Set this item to [Mode���� change�������] to�� show���� �������further ��������settings of�� the��� Drive����� Xpert�����

function. Configuration options: [Current setting] [Mode change]

Update To Super Speed [Press Enter]

This item appears only when the Drive Xpert Mode Update item is set to [Mode change] and allows you to use Super Speed function. Plug two identical SATA hard drives in the SATA_E1 (orange, port 0) and SATA�������E2 (white,������� port���� 1)�� connectors���������� on�� the motherboard and��� press����� the��� <Enter>������� key����.

Update To EZ Backup [Press Enter]

This item appears only ����when ���the Drive Xpert Mode Update item is set to [Mode change] ���and ������allows ���you ��to use��� EZ Backup function.� ����Plug ���two ���������identical SATA���� ����hard drives in the �������SATA E1 (orange,�������� ����port 0)�� ���and �������SATA E2 �������(white, ����port ��1) ����������connectors ��on the motherboard ���and press����� ���the �������<Enter> ����key.

Make necessary backup before using the Drive Xpert function:

•All original data of the hard drive connected to the SATA_E2 (white, port 1) connector on the motherboard will be erased for EZ Backup setup

•All original data of the two hard drives will be erased for Super Speed setup.

Update To Normal Mode [Press Enter]

This item appears only when���� the��� Drive Xpert Mode Update item is set to [Mode change] and��� allows������ you��� to�� use��� ���the �������SATA E1 ��������(orange, port���� 0)�� and��� SATA�������E2 �������(white, port 1) connectors as�� ������normal SATA���� �����������connectors.

ASUS P5Q Deluxe

4-49