Update To Super Speed [Press Enter]

This item appears only when you set the Drive Xpert Mode Update item to [Mode change] and allows you to use Super Speed function. Plug two identical SATA hard drives in the orange SATA port labeled SATA_E1 (port 0) and the white SATA port labeled SATA_E2 (port 1) and press the <Enter> key.

Update To EZ Backup [Press Enter]

This item appears only when you set the Drive Xpert Mode Update item to [Mode change] and allows you to use EZ Backup function. Plug two identical SATA hard drives in the orange SATA port labeled SATA_E1 (port 0) and the white SATA port labeled SATA_E2 (port 1) and press the <Enter> key.

•Make necessary backup before using the Drive Xpert function:

All original data of the SATA_E2 (white, port1) hard drive will be erased for EZ Backup setup.

All original data of the two hard drives will be erased for Super Speed setup.

•Refer to 4.3.11 ASUS Drive Xpert for detailed application instructions.

Update To Normal mode [Press Enter]

This item appears only when you set the Drive Xpert Mode Update item to [Mode change] and uses the orange SATA port labeled SATA_E1 (port 0) and the white SATA port labeled SATA_E2 (port 1) as normal SATA ports.

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

3-26

Chapter 3: BIOS setup