1.10.2Internal connectors
1.CPU, chassis, and power fan connectors
(4-pin CPU_FAN, 3-pin CHA_FAN, 3-pin PWR_FAN)
The fan connectors support cooling fans of 350 mA~2000 mA (24 W max.) or a total of 1 A~3.48 A (41.76 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors!
CPU_FAN
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
CHA_FAN PWR_FAN
GND |
|
|
|
| GND |
+12V |
|
|
|
| +12V |
Rotation |
|
|
|
| Rotation |
|
|
|
|
|
|
P5QL-CM fan connectors
Only the CPU fan supports the ASUS
2.Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.
+5V | SPDIFOUT GND |
SPDIF_OUT
P5QL-CM Digital audio connector
The S/PDIF module is purchased separately.
ASUS |