The following item appears only when you installed an Intel® CPU that supports the
Enhanced Intel® SpeedStep® Technology (EIST).
Intel(R) SpeedStep(TM) Tech [Enabled]
Allows you to use the Enhanced Intel® SpeedStep® Technology. When set to [Enabled], you can adjust the system power settings in the operating system to use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST. Configuration options: [Enabled] [Disabled]
2.4.3Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the submenu.
North Bridge ConfigurationMemory Remap Feature [Enabled]Allows you to enabled or disable the remapping of the overlapped PCI memory above the total physical memory. Enable this option only when you install
Allows you to enable or disable configuring the DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]Sets the IGD graphics mode.
Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB] [Enabled, 128MB]
DVMT Mode Select [DVMT Mode]Allows you to select the graphics memory type.
Configuration options: [DVMT Mode]
DVMT Memory [256MB]
Configuration options: [128MB] [256MB] [Maximum DVMT]
This option only appears when installing 1GB DDR2 DIMMs into the DIMM sockets.
Protect Audio Video Path Mode [Disabled]Allows you to set PAVP mode.
Configuration options: [Disabled] [Lite] [Paranoid]
Chapter 2: BIOS information |