PRODUCT FEATURES and GAS SPECIFICATIONS

HBDV7 Series Direct Vent Gas Fireplace

PRODUCT SPECIFICATIONS

This appliance has been certified for use with either natural or propane gas. Refer to appropriate data plates.

This appliance is not for use with solid fuels.

The appliance is approved for bedroom or bedsitting room installations.

The appliance must be installed in accordance with local codes if any. If none exist use the current installation code. ANSI Z223.1/NFPA 54 in the USA, CSA B149 in Canada.

This appliance is mobile home approved.

The appliance must be properly connected to a venting system.

The appliance is not approved for closet or recessed installations.

Hi/Lo Knob

 

Off/Pilot/On Knob

 

On/Off/RS Switch

FP2580

 

Ignitor

Optional Remote

Figure 1 -

Receiver

Blower Control

HBDV300/400 Fireplace

 

HIGH ELEVATIONS

Input ratings are shown in BTU per hour and are certified without deration for elevations up to 4,500 feet (1,370 m) above sea level.

For elevations above 4,500 feet (1,370 m) in USA, installation must be in accordance with the current ANSI Z223.1/NFPA 54 and/or local codes having juris- diction.

In Canada, please consult provincial and/or local authorities having jurisdiction for installation at eleva- tions above 4,500 feet (1,370 m).

GAS pressures

 

Natural

Propane (LP)

Inlet Minimum

4.5” w.c.

11.0” w.c.

Inlet Maximum

10.5” w.c.

13.0” w.c.

Manifold Pressure

3.5” w.c.

10.0” w.c.

Gas Specifications & ORIFICE SIZE

 

 

Max.Input

Min. Input

Orifice

Model

Fuel

BTU/h

BTU/h

Size

HBDV300NV7

Nat.

23,000

16,000

2.35 mm

HBDV300PV7

LP

23,000

18,000

1.50 mm

HBDV400NV7

Nat.

27,000

19,000

#41

HBDV400PV7

LP

26,000

20,000

1/16

HBDV300NSC7

Nat.

23,000

16,000

2.35 mm

HBDV300PSC7

LP

23,000

18,000

1.50 MM

HBDV400NSC7

Nat.

27,000

19,000

#41

HBDV400PSC7

LP

26,000

20,000

1/16

 

 

 

 

 

Before You Start

Read this homeowner manual thoroughly and follow all instructions carefully. Inspect all contents for shipping damage and immediately inform your dealer if any damage is found. Do not install any unit with damaged, incomplete, or substitute parts. Check your packing list to verify that all listed parts have been received. You should have the following:

Fireplace (Firebox and Burner System)

Rock Wool

Log Set

Items Required For Installation

Phillips Screwdriver

Framing Materials

Hammer

Wall Finishing Materials

Saw and/or saber saw

Level

Electric Drill and Bits

Tee Joint

Pliers

Measuring Tape

Square

Pipe Wrench

Caulking Material (Noncombustible)

Fireplace Surround Material (Noncombustible)

Piping Complying with Local Codes

Pipe Sealant Approved for use with Propane/LPG (Resistant to Sulfur Compounds)

54D8000

Page 5
Image 5
Monessen Hearth HBDV400N/PSC7, HBDV300N/PV7, HBDV400N/PV7, HBDV300N/PSC7 manual Product Specifications, High Elevations