Monessen Hearth HBDV300N/PSC7 manual Optional Fan Blower Systems, Blot Automatic Thermostat Blower

OPTIONAL FAN BLOWER SYSTEMS HBDV7 Series Direct Vent Gas Fireplace

BLOT AUTOMATIC THERMOSTAT BLOWER

Receptacle

Junction

Box

120VAC

BLACK

GREEN

WHITE BLACK WHITE BLACK BLACK FP2675

Speed Control

Before installing the blower, wire the receptacle into an electrical circuit. This should be done before framing the fireplace. Wire with minimum 60° C wire in accordance with prevailing codes.

Figure 56 -

BLOT Blower Wiring Diagram

FK-12 MANUAL BLOWER

1.This must be done before framing the fireplace. When installing the FK-12 blower, a wall switch control must be installed to control the blower.

2.The fireplace power supply is wired through the blower wall switch and then brought to the fireplace junction box.

3.The jumper clip on the plug receptacle must be re- moved. Figure 57. Use needlenose pliers to break off the jumper clip.

Plug into switch outlet

Jumper clip on plug
receptacle must be		Blower
removed on power side to		Wall Switch
make outlet switchable
Junction Box	Red
	Black	Black (live)
		Green (ground)
		White (neutral)
		FP2676

Figure 57 -	FK-12 Blower
FK-12 Blower wiring Diagram

54D8000 35