Refer to the audio configuration table for the function of the audio ports in 2, 4, or 6-channel configuration.

Audio 2, 4, or 6-channel configuration

P o r t

Headset

4 - channel

6 - channel

 

2-channel

 

 

Light Blue

Line In

Line In

Bass/Center

Lime

Line Out

Front Speaker Out

Front Speaker Out

Pink

Mic In

Rear Speaker Out

Rear Speaker Out

7 . USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

8 . USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

9 . VGA port. This 15-pin VGA port connects to a VGA monitor. 10 . Serial connector. This 9-pin COM port is for serial devices.

11 . PS/2 keyboard port (purple). This port is for a PS/2 keyboard.

1.10.2 Internal connectors

1 . Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5.

P5V800-MX

FLOPPY

PIN 1

NOTE: Orient the red markings on

the floppy ribbon cable to PIN 1.

P5V800-MX Floppy disk drive connector

1 - 24

Chapter 1: Product introduction