4.Press <Y> to confirm or <N> to return to the configuration options. If you selected <Y>, proceed to step 9.
5.Select Select Disk Drives, then press <Enter>. Use arrow keys to select disk drive, then press <Enter> to mark selected drive. An asterisk appears before a selected drive.
6.Select Block Size, then press <Enter> to set array block size. A list of valid array block sizes are displayed on a
4K
8K
16K
32K
64K
TIP : For server systems, use of a lower array block size is recommended. For multimedia computer systems used mainly for audio and video editing, a higher array block size is recommended for optimum performance.
Use arrow keys to move selection bar on items and press <Enter> to select.
7.Select Start Create Process and press <Enter> to set up hard disk for RAID system. The following confirmation message appears:
The data on the selected disks will
be destroyed. Continue? (Y/N)
8.Press <Y> to confirm or <N> to return to the configuration options.
9.Press <Esc> to go back to main menu.
RAID 1 for data protection1.From the create array menu, select Array Mode, then press <Enter>. The supported RAID configurations appear on a
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAN for capacity
2. Select RAID 1 for data protection then press <Enter>.
3 - 10 | Chapter 3: Software support |