2 . Primary/Secondary IDE connector (40-1 pin PRI_IDE, SEC_IDE)

This connector supports the provided UltraATA133 IDE hard disk ribbon cable. Connect the cable’s blue connector to the primary (recommended) or secondary IDE connector, the black connector for the UltraATA133 master device.

1. Follow the hard disk drive documentation when setting the device in master or slave mode.

2.Pin 20 on each IDE connector is removed to match the covered hole on the UltraATA cable connector. This prevents incorrect orientation when you connect the cables.

3.The hole near the blue connector on the UltraATA cable is intentional.

P5V800-MX

IDE

 

PRI_

PIN 1

P5V800-MX IDE connectors

NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.

SEC_IDE

PIN 1

ASUS P5V800-MX

1 - 25