2.6.1Boot Device Priority

Boot Device Priority

1st Boot Device 2nd Boot Device 3rd Boot Device

[1st FLOPPY DRIVE] [PM-ST330620A] [PS-ASUS CD-S360]

1st ~ xxth Boot Device [1st Floppy Drive]

These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.

Configuration options: [xxxxx Drive] [Disabled]

2.6.2Boot Settings Configuration

Boot Settings Configuration

 

Quick Boot

 

[Enabled]

Full Screen Logo

[Enabled]

AddOn ROM

Display Mode

[Force BIOS]

Bootup Num-Lock

[On]

Wait For ‘F1’ If Error

[Enabled]

Hit ‘DEL’

Message Display

[Enabled]

Interrupt

19 Capture

[Disabled]

Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items.

Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled]

Set this item to [Enabled] to use the ASUS MyLogo2™ feature.

2 - 30

Chapter 2: BIOS setup