7 . ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

• Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot up.

When using an ATX 12 V PSU with 20-pin power plug, make sure that it can provide 8 A on the +12 V lead and at least 1A on the +5V standby lead (+5 VSB). The minimum recommended wattage is 300 W, or 350 W for a fully configured system. The system may become unstable or may not boot up if the power is inadequate.

You must install a Power Supply Unit (PSU) with a higher power rating if you intend to install additional devices.

P5VDC-MX

ATX12V

GND GND

+12V DC +12V DC

EATXPWR

+3 Volts +3 Volts

-12 Volts +3 Volts

Ground Ground

PSON# +5 Volts

Ground Ground

Ground +5 Volts

Ground Ground

-5 Volts Power OK

+5 Volts +5V Standby

+5 Volts +12 Volts

+5 Volts +12 Volts

P5VDC-MX ATX power connectors

Ground +3 Volts

1 - 30

Chapter 1: Product introduction

Page 42
Image 42
Asus P5VDC-MX manual ATX power connectors 24-pin EATXPWR, 4-pin ATX12V, Eatxpwr