Asus P5VDC-MX manual Boot menu, Boot Device Priority

VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators.

Q-FAN Function [Disabled]

Allows you to disable or enabled the Q-Fan function that monitors the CPU/ System temperature and smartly adjust the fan speed. Configuration options: [Disabled] [Enabled]

The CPU Fan Ratio item appears when you enable th CPU Q-Fan Function.

CPU Fan Ratio [Auto]

Allows you to select the appropriate the CPU fan speed ratio for the system. The default [Auto] automatically selects the fan speed ratio when operate the low CPU temperature. Select a higher ratio if you installed additional devices and the system requires more ventilation. This item appears only when the CPU Q-Fan Function is Enabled. Configuration options: Configuration options: [Auto] [90%] [80%]~[20%]

2.6Boot menu

The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu.

Boot Settings

Boot Device Priority

Boot Settings Configuration

Security

2.6.1Boot Device Priority

Boot Device Priority

1st Boot Device 2nd Boot Device 3rd Boot Device

[1st FLOPPY DRIVE] [PM-ST330620A] [PS-ASUS CD-S360]

1st ~ xxth Boot Device [1st Floppy Drive]

These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.

Configuration options: [xxxxx Drive] [Disabled]

2 - 30 Chapter 2: BIOS setup