3.From this point, you can auto-configure the RAID array by selecting Auto Setup for Data Security or manually configure the RAID array for mirrored sets. If you want to auto-configure, proceed to the next step, otherwise, skip to step 6.

4.Select Auto Setup for Data Security and press <Enter>. The following confirmation message appears.

Auto create array will destroy all

data on disks, Continue? (Y/N)

5.Press <Y> to confirm or <N> to return to the configuration options. If you selected <Y>, proceed to step 11.

6.Select Select Disk Drives, then press <Enter>. Use arrow keys to select disk drive/s, then press <Enter>. An asterisk appears before a selected drive.

7.Select Start Create Process and press <Enter> to setup hard disk for RAID system. The following inquiry appears:

Save the data on source disk to

mirror after creation? (Y/N)

8.If you select <Y> the utility will duplicate your data. Press <Y> anytime if you want to exit the duplication process.

Duplicating...

Press Yes(Y) to Escape

9.If you select <N>, the following confirmation message appears.

The data on the selected disks will

be destroyed. Continue? (Y/N)

10.Press <Y> to confirm or <N> to return to the configuration options.

11.Press <Esc> to go back to main menu.

ASUS P5VDC-MX

3 - 11

Page 93
Image 93
Asus P5VDC-MX manual If you select N, the following confirmation message appears