2.3.5System Information

This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu.

Bios Information

Displays the auto-detected BIOS information.

Processor

Displays the auto-detected CPU specification.

System Memory

Displays the auto-detected system memory.

2.4Ai Tweaker menu

The Ai Tweaker menu items allow you to change the settings for the CPU and other system devices.

 

 

 

 

BIOS SETUP UTILITY

 

 

 

 

 

Main

Ai Tweaker

 

Advanced

Power

Boot

Tools

Exit

Configure System Performance Settings

 

 

 

 

[D.O.C.P.]

Ai Overclock Tuner

 

[Auto]

 

 

 

 

It’s designed to

 

 

 

 

 

overclock DRAM

CPU Ratio Setting

 

[Auto]

 

 

 

 

 

 

 

 

 

frequency by

Intel(R) SpeedStep(TM) Tech

[Enabled]

 

 

 

 

 

 

 

 

adjusting BCLK

Intel(R) TurboMode Tech

[Enabled]

 

 

 

 

 

 

 

 

frequency. [X.M.P.]

Xtreme Phase Full Power Mode [Auto]

 

 

 

 

 

 

 

 

When X.M.P. is

DRAM Frequency

 

[Auto]

 

 

 

 

 

 

 

 

 

enabled BLCK

QPI Frequency

 

[Auto]

 

 

 

 

 

 

 

 

 

frequency, CPU

DRAM Timing Control

 

 

 

 

 

ratio and memory

 

 

 

 

 

parameters will be

CPU Differential Amplitude

[Auto]

 

 

 

 

auto optimized.

CPU Clock Skew

 

[Auto]

 

 

 

 

 

Select Screen

 

 

 

 

 

 

 

 

 

 

******* Please key in numbers directly! *******

 

 

 

 

Select Item

VCORE Over Voltage

 

[Auto]

 

 

 

 

+-

Change Field

 

 

 

 

 

Tab

Select Field

IMC Voltage

 

[Auto]

 

 

 

 

 

 

 

 

 

F1

General Help

DRAM Voltage

 

[16V]

 

 

 

 

CPU PLL Voltage

 

[Auto]

 

 

 

 

F10

Save and Exit

 

 

 

 

 

ESC

Exit

 

 

 

 

 

 

 

 

 

v02.61 (C) Copyright 1985-2009, American Megatrends, Inc.

Scroll down to display the following items:

BIOS SETUP UTILITY

Main Ai Tweaker Advanced Power Boot Tools Exit

PCH Voltage[Auto]

DRAM DATA REF Voltage on CHA [Auto]

DRAM DATA REF Voltage on CHB [Auto]

************************************************

Load-Line Calibration

[Auto]

Min = 1.050V

Max = 1.150V Standard = 1.050V Increment = 0.010V +/- : Raise/Reduce

Select Screen

Select Item

+- Change Field

Tab Select Field

F1 General Help

F10 Save and Exit

ESC Exit

v02.61 (C) Copyright 1985-2009, American Megatrends, Inc.

2-10

Chapter 2: BIOS information