Red Hat® Enterprise Linux OS 6.x

To install the LSI MegaRAID controller driver when installing Red Hat® Enterprise OS:

1.Boot the system from the Red Hat® OS installation CD.

2.Press <Tab> to edit options.

3.While booting from DVD, press <ESC> to provide the third party driver. Enter the following command at the boot: Linux dd then press <ENTER>.

4.Insert the Red Hat® Enterprise RAID driver disk into the USB floppy disk drive.

Write-protect the floppy disk to avoid computer virus infection.

If the Red Hat® Enterprise RAID driver is stored in a USB flash drive, insert the USB flash drive into an available USB port.

ASUS P9D-I

6-9