USB transfer time-out [20 sec]

Allows you to select the USB transfer time-out value. Configuration options: [1 sec] [5 sec] [10 sec] [20 sec]

Device reset time-out [20 sec]

Allows you to select the USB device reset time-out value. Configuration options: [10 sec] [20 sec] [30 sec] [40 sec]

Device power-up delay [Auto]

This allows you to set the maximum time the device will take before it properly reports itself to the Host Controller. Configuration options: [Auto] [Manual]

4.4.7ACPI Settings

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

Advanced

ACPI Settings

 

Enable Hibernation

[Enabled]

ACPI Sleep State

[S3 only(Suspend to ...]

Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may not be effective with some OS.

Enable Hibernation [Enabled]

Allows you to enable or disable the Hibernation feature (OS/S4 sleep state). Configuration options: [Disabled] [Enabled]

ACPI Sleep State [S3 only (Suspend to RAM)]

Allows you to set the ACPI Sleep state. Configuration options: [Suspend Disabled] [S3 only (Suspend to RAM)]

4.4.8WHEA Support

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

Advanced

WHEA Support

[Enabled]

Enables or disable

Windows Hardware Error

 

 

Architecture.

 

 

 

WHEA [Enabled]

Allows you to enable or disable the Windows® Hardware Error Architecture (WHEA) support. Configuration options: [Disabled] [Enabled]

4-22

Chapter 4: BIOS setup