7.Serial ATA RAID connectors (7-pin SATA_RAID1, SATA_RAID2, SATA_RAID3, SATA_RAID4)

The Serial ATA RAID connectors are available on SATA models only.

These Serial ATA connectors support SATA hard disks that you can configure as a RAID set. Through the onboard Adaptec® AIC-8110X RAID controller, you may create a RAID0, RAID1, RAID0+1, or multi-RAID configuration.

SATA_RAID4

PSCH-SR

SATA_RAID3

SATA_RAID2

SATA_RAID1

GND

RSATA_TXP1

RSATA_TXN1

GND

RSATA_RXN1

RSATA_RXP1

GND

PSCH-SR SATA RAID Connectors

• If you wish to create a RAID set, make sure that you have connected the SATA cable and installed Serial ATA hard disk drives. You cannot enter the SATARaid™ utility and SATA BIOS setup during POST if there are no connected Serial ATA HDDs.

•The Adaptec® AIC-8110X RAID controller does not support ATAPI devices such as CD-ROMs, DVD-ROMs, etc.

8.LAN LED connector (4-pin LAN_LED1)

This connector is for the LAN activity LEDs in the system front panel.

PSCH-SR

PSCH-SR LANLED Connector

LAN_LED1

LAN2_LINKACTLED+

LAN2_LINKACTLED-

LAN1_LINKACTLED-

LAN1_LINKACTLED+

ASUS PSCH-SR motherboard

2-27