PIO Mode [Auto]

Sets the PIO mode for the IDE drive. The settings Mode 0 to 4 allow successive increase in performance. Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4]

UDMA Mode [Auto]

When this item is set to [Auto], the UDMA capability allows improved transfer speeds and data integrity for supported IDE drives. Configuration options: [Disabled] [Auto]

Manually detecting an IDE drive

If you wish to manually enter the drive information, set the Primary IDE Master item to [Manual], and the Access Mode item to [CHS].

Primary Master

 

 

Auto-Detection

[Press

Enter]

 

 

 

Primary IDE Master

[Manual]

 

Access Mode

[CHS]

 

 

 

 

 

 

Capacity

0

MB

Cylinder

0

 

 

Head

0

 

 

Precomp

0

 

 

Landing Zone

0

 

 

Sector

0

 

 

PIO Mode

[Auto]

 

 

UDMA Mode

[Auto]

 

 

Transfer Mode

None

 

 

S.M.A.R.T. Status

None

 

 

Select Menu

Item Specific Help

Selects the type of fixed disk connected to the system.

[Manual] lets you select the number of cylinders, heads, etc. Note: PRECOMP=65535 means NONE.

Before attempting to manually configure an IDE drive, make sure that you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed IDE drive!

To manually enter the number of cylinder, head, precomp, landing zone, and sector per track for the drive, highlight an item, key-in the value that you obtained from the drive documentation, then press <Enter>. Refer to the drive documentation or the drive label for this information.

ASUS PSCH-SR motherboard

4-11