The Ultra320 SCSI connector is available on SCSI models only.
This single channel Ultra320 SCSI connector supports SCSI hard disk drives that you may configure as a RAID set through the onboard Adaptec® 7901 SCSI controller. The channel can support a maximum of 15 devices as specified by Ultra320 SCSI standards.
SCSIA1
34 1
68 35
If you wish to create a SCSI RAID set, make sure that you have connected the SCSI cable and installed SCSI devices.
12.Locator connectorThis connector controls the locator LEDs in the system front or rear panel. By default, this connector comes without a jumper.
LOCATOR
LOCATORLED1+ | LOCATORLED1- | LOCATORBTN#+ | GND | LOCATORLED2- | LOCATORLED2+ |
ASUS |