6.2.3Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive.

To reset a RAID set hard disk drive:

1.From the utility main menu, select 3. Reset Disks to Non-RAIDand press <Enter>.

2.Press the up/down arrow keys to select the drive(s) or disks of the RAID set you want to reset, then press <Space>. A small triangle before the Port number marks the selected drive. Press <Enter> when you are done.

[ RESET RAID DATA ]

Resetting RAID disk will remove its RAID structures and revert it to a non-RAID disk.

WARNING: Resetting a disk causes all data on the disk to be lost. (This does not apply to Recovery volumes)

Port

Drive Model

Serial #

Size

Status

 

0

ST3300656SS

HWAS0000991753TR

279.3GB

Member Disk

1

ST3300656SS

37VN00009846RAJ1

279.3GB

Member

Disk

Select the disks that should be reset.

[ ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

3.Press <Y> in the confirmation window to reset the drive(s) or press <N> to return to the utility main menu.

6-8

Chapter 6: RAID configuration