3.The utility immediately starts rebuilding after the disk is selected. The status of the degraded RAID volume is changed to “Rebuild”.

Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023

Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.

 

 

 

 

[ MAIN MENU ]

 

 

 

1. Create RAID Volume

 

3. Reset Disks to Non-RAID

 

2. Delete RAID Volume

 

4. Exit

 

 

RAID Volumes:

 

[ DISK/VOLUME INFORMATION]

*=Data is Encrypted

Level1

Strip

Size

ID

Name

Status

Bootable

1

Volume0

RAID1(Mirror)

N/A

149.0GB

Rebuild

Yes

Physical Devices:

Serial #

 

Size

Type/Status(Vol ID)

Port

Drive Model

 

1

ST3160812AS

9LS0F4HL

 

149.0GB

Member Disk(0)

2

ST3160812AS

3LS0JYL8

 

149.0GB

Member Disk(0)

Volumes with “Rebuild” status will be rebuilt within the operating system.

 

 

 

[ ]-Select

[ESC]-Exit

[ENTER]-Select Menu

4.Exit Intel Rapid Storage Technology and reboot the system.

5.Select Start > Programs > Intel Rapid Storage > Intel Rapid Storage Console or click the Intel Rapid Storage Technology tray icon to load the Intel Rapid Storage Manager utility.

6.From the View menu, select Advanced Mode to display the details of the Intel Rapid Storage Console.

7.From the Volumes view option, select RAID volume to view the rebuilding status. When finished, the status is changed to “Normal”.

Rebuilding the RAID with a new hard disk

If any of the SATA hard disk drives included in the RAID array failed, the system displays the status of the RAID volume as “Degraded” during POST. You may replace the disk drive and rebuild the RAID array.

To rebuild the RAID with a new hard disk:

1.Remove the failed SATA hard disk and install a new SATA hard disk of the same specification into the same SATA Port.

Select a destination disk with the same size as the original hard disk.

2.Reboot the system then follow the steps in section Rebuilding the RAID with other non-RAID disk.

6-10

Chapter 6: RAID configuration