USB transfer time-out [20 sec]

Allows you to select the USB transfer time-out value. Configuration options: [1 sec] [5 sec] [10 sec] [20 sec]

Device reset time-out [20 sec]

Allows you to select the USB device reset time-out value. Configuration options: [10 sec] [20 sec] [30 sec] [40 sec]

Device power-up delay [Auto]

This allows you to set the maximum time the device will take before it properly reports itself to the Host Controller. Configuration options: [Auto] [Manual]

5.4.7TPM

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced

Configuration

[Disable]

Enables or Disables BIOS

TPM Support

support for security

 

 

device.O.S. will not

Current Status Information

 

show Security Device. TCG

 

EFI protocol and INT1A

NO Security Device Found

 

interface will not be

 

 

available.

Security Device Support [Disabled]

Allows you to enable or disable BIOS support for security devices. Configuration options: [Disabled] [Enabled]

5.4.8ACPI Settings

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

Advanced

ACPI

Settings

 

Enable Hibernation

[Enabled]

ACPI

Sleep State

[Both S1 and S3 avai...]

Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may not be effective with some OS.

Enable Hibernation [Enabled]

Allows you to enable or disable the Hibernation feature (OS/S4 sleep state). Configuration options: [Disabled] [Enabled]

ACPI Sleep State [Both S1 and S3 available for OS to choose from]

Allows you to set the ACPI Sleep state. Configuration options: [Suspend Disabled] [S1 only (CPU Stop Clock)] [S3 only (Suspend to RAM)]

[Both S1 and S3 available for OS to choose from]

ASUS RS300-E8 Series

5-21