2.1Chassis cover

Removing the rear cover

1.Locate and remove the front side screws.

Front side screw

2.Loosen the two thumbscrews on the rear panel to release the rear cover from the chassis.

Thumbscrews

3.Firmly hold the cover and slide it toward the rear panel for about half an inch until it is disengaged from the chassis.

4.Lift the cover from the chassis.

5.To recover the rear cover, reverse step 1 to 4.

A protection film is pre-attached to the system cover before shipping. Please remove the protection film before turning on the system for proper heat dissipation.

2-2

Chapter 2: Hardware setup