5.Insert the RAID card into the PIKE RAID card slot. Ensure that it is completely seated on the PIKE RAID card slot.

6.Remove the data cables connected to the SATA connectors on the motherboard.

7.Connect the data cables, by numerial order, to the SAS connectors labeled SAS1-4 (red) on the motherboard.

8.Set the SGPIO_SEL1 jumper on the backplane to pin 2-3 when connecting data cables to the SAS connectors on the motherboard.

The heatsink on PIKE 1078/PIKE 2008 Series might interfere the components on the expansion card. Ensure that the height of the components is less than 5.8 mm.

ASUS RS500A-E6/PS4

2-19