7.Serial General Purpose Input/Output connectors (8-1 pin SGPIO1/2)

These connectors are used for the SAS chip SGPIO interface that controls the LED pattern generation, device information and general purpose data.

These connectors functions only when you install an ASUS PIKE SAS RAID card.

8.Serial port connector (10-1 pin COM2)

This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.

The serial port module is purchased separately.

ASUS RS500A-E6/PS4

4-11