Asus RS500A-E6/PS4 ECC Configuration, DRAM Timing Configuration, Memory Timing Parameters [CPU Node 0]

ECC Configuration

		BIOS SETUP UTILITY
	Advanced
ECC Configuration			Set the level of ECC
			protection. Note: The
ECC Mode		[Basic]	‘Super‘ ECC mode
			dynamically sets the
DRAM ECC Enable		[Enabled]
			DRAM scrub rate so
			all of memory is
			scrubbed in 8 hours.
			←→	Select Screen
			↑↓	Select Item
			+-	Change Option
			F1	General Help
			F10	Save and Exit
			ESC	Exit

v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.

ECC Mode [Basic]

Disables or sets the DRAM ECC mode that allows the hardware to report and correct memory errors.

Configuration options: [Disabled] [Basic] [Good] [Super] [Max] [User]

DRAM Timing Configuration

		BIOS SETUP UTILITY
	Advanced
DRAM Timing Configuration					Options
				Auto
DRAM Timing Config		[Auto]
				Manual
			←→		Select Screen
			↑↓		Select Item
			+-		Change Option
			F1		General Help
			F10		Save and Exit
			ESC		Exit

v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.

DRAM Timing Config [Auto]

Allows you to select the DRAM timing mode. Configuration options: [Auto] [Manual]

Memory Clock Speed [400 MHz]

This item appears only when you set the DRAM Timing Config item to [Manual] and allows you to set the memory clock frequency. Configuration options: [400 MHz] [533 MHz] [667 MHz]

Memory Timing Parameters [CPU Node 0]

Allows you to select which node's timing parameters to display.

5-18 Chapter 5: BIOS setup