6.2.3Initializing the virtual drives

After creating the RAID set(s), you must initialize the virtual drives. You may initialize the virtual drives of a RAID set(s) using the Initialize or Objects command on the Management Menu.

Using the Initialize command

To initialize the virtual drive using the Initialize command

1.From the Management Menu, select Initialize, and then press <Enter>.

LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010

BIOS Version A.10.09231523R

Management Menu

Configure

Initialize

Objects

Rebuild

Check Consistency

Initialize VD(s)

Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option

2.The screen displays the available RAID set(s) and prompts you to select the virtual drive to initialize. Use the arrow keys to select the virtual drive from the

Virtual Drive selection, and then press <Space>.

LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010

BIOS Version A.10.09231523R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LD

RAID

 

Virtual Drive(s) Configured

 

Status

 

 

 

 

 

 

 

 

 

 

Size

#Stripes

StripSz

 

 

 

 

Management Menu

 

 

 

Configure

 

 

 

 

 

 

 

 

 

 

 

Initialize

 

0

1

148.580GB

2

64 KB

ONLINE

 

 

Objects

 

 

 

 

 

 

 

 

 

 

 

Rebuild

 

 

 

 

 

 

 

 

 

 

 

Check Consistency

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Virtual Drives

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Virtual Drive

0

 

 

 

 

 

 

 

 

 

 

 

Select VD

SPACE-(De)Select, F10-Initialize

6-12

Chapter 6: RAID configuration