2.5Expansion slot
2.5.1Installing an expansion card to the riser card bracket
The barebone server comes with a riser card bracket. You need to remove the bracket if you want to install PCI Express x8 or x16 expansion cards.
To install a PCI Express x8 or x16 card:
1.Firmly hold the riser card bracket, then pull it up to detach it from the PCI Express x16 slot on the motherboard.
2.Place the riser card bracket on a flat and stable surface, then remove the screw from the slot bay.
3.Install a PCI Express x8 or x16 card to the bracket as shown, then secure the card with a screw.
4.Repeat the previous steps to Install another PCI Express x8 or x16 card if needed.
Chapter 2: Hardware setup |