6.3Intel® Rapid Storage Technology Option ROM Utility

The Intel® Rapid Storage Technology Option ROM utility allows you to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge.

To enter the Intel® Rapid Storage Technology option ROM utility:

1.Install all the Serial ATA hard disk drives.

2.Turn on the system.

3.During POST, press <Ctrl+I> to display the utility main menu.

Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1104

Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.

 

 

 

 

[ MAIN MENU ]

 

 

 

3.

Reset Disks to Non-RAID

 

1. Create RAID Volume

 

2. Delete RAID Volume

4.

Exit

 

 

 

 

[ DISK/VOLUME INFORMATION ]

 

RAID Volumes:

 

 

 

 

None

defined.

 

 

 

 

Physical Disks:

 

 

 

 

ID

Drive Model

Serial #

Size Type/Status(Vol ID)

0

 

ST3300656SS

HWAS0000991753TR

279.3GB

Non-RAID Disk

1

 

ST3300656SS

37VN00009846RAJ1

279.3GB

Non-RAID Disk

2

 

ST3300656SS

397600009846UEDY

279.3GB

Non-RAID Disk

3

 

ST3300656SS

GWC50000991756G6

279.3GB

Non-RAID Disk

[↑↓]-Select

 

[ESC]-Exit

[ENTER]-Select Menu

The navigation keys at the bottom of the screen allow you to move through the menus and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen.

6-24

Chapter 6: RAID configuration