3.HARDWARE SETUP

2)USB Device Wake Up (USBPWR1,USBPWR2)

These allow you to disable or enable the USB device wake up function. Set these jumpers to Enable if you wish to use your USB devices to wake up your computer. This feature requires anATX power supply that can supply at least 2Aon the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not power ON if you set this to Enable and do not have the appropriate ATX power supply. NOTE: This jumper must be set in conjunction with Wake On USB for STR State in 4.5.1 Power Up Control.

NOTES1.For suspend to RAM function, these jumpers must be set to Enable.

2.The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal working conditions or in the sleep mode.

 

 

USBPWR1

 

 

1

2

2

3

 

Disable

Enable

 

(Default)

 

 

®

 

USBPWR2

 

TUSL2-M

1

2

2

3

 

 

Disable

Enable

TUSL2-M USB Device Wake Up

(Default)

 

 

3)CNR/USB Selection (CNRUSB1/CNRUSB2)

The CNR slot can support an optional USB hub CNR card. If a USB hub CNR card is used, set these jumpers to CNR. Otherwise, leave them on the default setting of USB2 Connect.

.3 SETUPH/W

Motherboard Settings

CNRUSB1

CNRUSB2

1

2

2

3

 

 

 

 

 

®

TUSL2-M

USB2 Connect CNR (default)

TUSL2-M USB/CNR Selection

ASUS TUSL2-M User’s Manual

19