Operation
Filling with water continued
4.Replace the insert assembly and tighten cap until snug.
5.Replace water tank by lining up the vertical guides and gently sliding it back into place.
Power cord
Unwrap power cord before operating unit.
Indicator light
The blue indicator light will illuminate when the unit is plugged in.
Steam trigger
Pump to release steam.
NOTE: Continuous steam can be achieved by rhythmically pumping the trigger.
Tools and accessories
Bristle brush
For stubborn messes, attach bristle brush to the underside of the unit. Remove microfiber pad. A. Locate tab on the front of the bristle block and fit into the slot on the underside of the unit. B. Snap the back of the bristle block into place.
Steam concentrator attachment For steam cleaning
Steam cleaning all living areas
1.Fill with cool tap water or distilled/ demineralized water.
2.Connect the plug to an appropriate outlet.
3.The unit should be ready to use in 30 seconds or less. To sanitize an area (attack invisible germs and bacteria), place the Steam Sponge over the spot for a minimum of 15 seconds using continuous team, but no longer then 20 seconds using continuous steam.
For larger areas, overlap Steam Sponge placement.
CAUTION:
Always unplug your Steam Sponge before filling/refilling.
CAUTION:
Before disconnecting a tool from the steam cleaner, make certain that steam is no longer coming from the nozzle. Use an oven mitt to remove tools, or wait until they cool before removing.
A.
B.
CAUTION:
Keep face and all exposed skin away from steam. Failure to do so may result in personal injury.
5
w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
