Kyocera 6030 manual Error Messages Checkpoints Corrective Actions

Troubleshooting

Error Messages	Checkpoints	Corrective Actions	Reference
			Page

The left tray exceeds capacity. Remove paper, and press "Start" key.

(Too much paper in left tray. Remove paper, and press "Start" key.)

Is the maximum storage capacity of the output tray exceeded?

Remove paper from the output tray	—
and press the Start key to resume
copying.

The left tray exceeds capacity. Remove paper, and press "Continue" key.

(Too much paper in left tray. Remove paper, and press "Continue" key.)

Is the maximum storage capacity of the output tray exceeded while using printer functions?

Remove paper from the output tray	—
and press [Continue] to resume
copying.

Finisher paper capacity exceeded. (Tray #) Remove paper, and press "Start" key.

Is the maximum capacity of the optional document finisher exceeded?

Remove paper from the document	—
finisher tray and press the Start key to
resume copying.

Finisher paper capacity exceeded. (Tray #) Remove paper, and press "Continue" key.

Is the maximum capacity of the optional document finisher exceeded while using printer functions?

Remove paper from the document	—
finisher tray and press [Continue] to
resume copying.

These functions cannot be	Have you selected functions that	Check the settings.	—
combined.	cannot be used together?
Exceeds pre registered	Is the maximum limit for copying as	The copy volume has been reached	Advanced
copying quantity.	specified in Job Accounting mode	the set limit of your department. No	Operation
(Copy limit for this ID-code	exceeded?	additional copying is possible. Use the	Guide,
has been reached. No		copy management function to clear	Chapter 4
		the copy count.
copying possible.)
Insert key counter.	Is the key counter inserted correctly?	Insert the key counter securely and	—
		completely.
Memory full.	—	The memory buffer is full. Print or	—
		delete the scanned data so far. No
		further copying or scanning is
		possible until either operation has
		been executed.
Memory full. Delete the	—	The data box for document	Advanced
registered data in the box.		management functions has been	Operation
(Memory full. Delete the		reached the permissible capacity.	Guide,
		When assigning new originals to the	Chapter 2
registered data from box.)
		boxes, delete unnecessary data.
Toner will be empty soon.	—	Prepare the replacement toner	page 5-4
		container.
Ready to copy. Add toner.	—	The copier is running low on toner;	page 5-4
		only one page may be copied at a
		time. Prepare a replacement toner
		container.
Add toner to resume	—	Replace the toner container.	page 5-4
copying.
Image Cycle.	—	Toner replenishment is in progress.	—
(Now adding toner.)		Wait until the process is completed.

6-6