Preparing to Copy
3Holding the paper width adjusting tab both ends, move the paper width guide to fit the paper.
NOTE: Paper sizes are marked on the cassette.
To switch between inch and metric paper sizes, slide the size adjustment switch.
1Holding the paper width adjustment tab both ends, move the paper width guide to anywhere that the paper size scale is not indicated.
2Rotate the size adjustment switch (A) 90 degrees, horizontal to vertical. 
3Slide the size adjustment lever (B) to upper (C) or lower (I) position.
I: Inches
C: Metrics
A |
B |
4Rotate the size adjustment switch 90 degrees, vertical to horizontal.
4Align the paper flush against the right side of the
cassette as you load it.
IMPORTANT: Be sure that the paper length and width guides rest securely against the paper. If there is a gap, readjust the guides to fit the paper. The gap may cause paper jam.
Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause paper jams.
Ensure that the loaded paper does not exceed the level indicated. Paper that exceeds the level indicated may cause paper jam.
When loading paper, keep the side toward the sealed side facing down.
