III. INSTALLATION

Jumper Settings

1.Onboard Multi-I/O Selection (IO SEL)

You can selectively disable each onboard Multi-I/O item (floppy, serial, paral- lel, and IrDA) through Chipset Features Setup of BIOS SOFTWARE or dis- able all Multi-I/O items at once with the following jumper in order to use your own Multi-I/O card.

Multi-I/O

SIO

 

Enable

[1-2] (Default)

 

Disable

[2-3]

 

 

I/O

I/O

 

1

1

 

2

2

 

3

3

 

Enable (Default)

Disabled

Super Multi I/O Setting (Enable / Disable)

2.Flash ROM Boot Block Programming (BBLKW)

This sets the operation mode of the boot block area of the Programmable Flash ROM to allow programming in the Enabled position. This is required only if prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE.

Programming BBLKW

Disabled

[1-2]

(Default)

Enabled

[2-3]

 

INSTALLATION

(Jumpers)

III.

 

 

 

BBLKWBBLKW

Disabled/Protect Enabled (Default)

Boot Block Programming (Disable / Enable)

ASUS TX97-E User’s Manual

15