Asus TX97-E V.SUPPORT SOFTWARE, CPU, CPU, CPU A, CPU B, Extra, Power, NOTES:, (LDCM), Chassis, Chassis, Chassis, SOFTWARE, PC Health, The fans are

V.SUPPORT SOFTWARE•Custom Setup: (For Experienced Users)

1.Choose File New from the pull-down menu of the "Untitled" screen. Type in a system name.

2.Make the appropriate settings on the right-hand side. Note following:-I2C and Network should not be modified

-Currently only ATI Video cards can be monitored by LDCM, do not select Video ATI if you are using other video cards.

3.Choose LM78 from the pull-down menu. Note the following:

-The fans are auto-detected, do not make any selections for Chassis Fan, CPU A Fan, CPU B Fan.

-Change the Threshold RPM to 1,500 RPM-Change the Threshold RPM Min to 1,320 RPM4.Click Save button to save settings and exit.5.Choose FileSave from pull-down menu, enter a file name, click Save.6.Exit the program screen.

7.Run SETUP.EXE and choose the your system configuration file that you have just created.

NOTES:

1.System will hang if you click the "Workstation Summary" or "Drives" Icon when a floppy drive is not installed. For a faster response, insert a floppy dis- kette before choosing this function.

2.The LDCM only displays half the actual fan RPM. Multiply the displayed fan RPM by 2 for the actual fan RPM.

3.Chassis Fan and CPU A Fan RPM must be at least 2,640 RPM to be monitored by the LDCM.

4.CPU B Fan must be at least 2,660 RPM to be monitored by the LDCM.5.Fan labels are not consistent, use this table for reference:

PC Health	LDCM Notification Config.	BIOS/Motherboard
Chassis	CPU	Chassis
CPU A	Chassis	CPU
CPU B	Extra	Power

6.LDCM currently can only detect ATI video cards, choose "Non-ATI" in Local Setup otherwise a one-time message will show (Error [1] retrieving Mach64 attributes). You may ignore this message by clicking the OK button.

7.The administrator LDCM cannot cross a network bridge to other workgroups.8.AMD and Cyrix CPUs cannot be detected by the LDCM.9.The COM port that is in use will not show up in "Input/Output Ports."

10.LDCM Administrator installation requires a network card or else the admin- istrator features will run very slowly.

11.Mouse (Pointer) information does not show when there is mouse activity after Workstation Summary is selected in Windows NT.

SOFTWARE	(LDCM)
V.

ASUS TX97-E User’s Manual 55