INSTALLATION .III (Jumpers)

III.INSTALLATION3.Real Time Clock (RTC) RAM (RTCLR)

The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Turn off your computer, (2) Move this jumper to “Clear Data,”

(3)Move the jumper back to “Operation,” (4) Turn on your computer, (5) Hold down <Delete> during bootup and enter BIOS setup to re-enter user preferences.

Battery Test Jumper (RTCLR)

You can test the battery’s current by removing this jumper and attaching a current meter to pins 2&3. WARNING: You must unplug the power cord to your power supply to ensure that there is no power to your motherboard. The CMOS RAM containing BIOS setup information may be cleared by this action. You should enter BIOS to “Load Setup Defaults” and re-enter any user information after removing and reapplying this jumper.

RTC RAMRTCLR
Operation

[2-3]

(Default)
Clear Data

[1-2]

(momentarily)

Battery Test

 

RTCLR

RTCLR

Operation (Default)

Clear Data

RTC RAM (Operation / Clear Data)

16

ASUS TX97-E User’s Manual