2.8Installing a hard disk drive

The system may have one pre-installed 3.5-inch Serial ATA or IDE hard disk drive. Refer to this section to install additional Serial ATA or IDE hard disk drive(s).

To install a Serial ATA hard disk drive:

1.Place the chassis upright.

2.Use a screw driver to remove the HDD drive slot metal plate cover.

3.With the HDD label side up, carefully insert the drive into the 3.5-inch bay and push the drive into the bay until its screw holes align with the holes on the drive bay.

4

4 3

4.Secure the drive with two screws on both sides.

ASUS Vintage V2-PE2

2-17