Asus V2-PE2 Internal Audio Connectors, 7. Internalaudio connectors (4-pin CD, 4-pin AUX), 6. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

6. ATX power connectors (24-pi n EATXPWR, 4-pi n ATX12V)

These connectors are for ATX power supply plugs. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

ATX12V EATXPWR

ATX Power Connector

	GND	GND
+12VDC		+12VDC +3 Volts	+3 Volts
		-12 Volts	+3 Volts
		Ground	Ground
		PSON#	+5 Volts
		Ground	Ground
		Ground	+5 Volts
		Ground	Ground
		-5 Volts	Power O
		+5 Volts	+5V Standby
		+5 Volts	+12 Volts
		+5 Volts	+12 Volts
		Ground	+3 Volts

•Do not forget to connect the 4-pin ATX +12 V power plug;

otherwise, the system will not boot.

•Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•Make sure that your power supply unit (PSU) can provide at least the minimum power required by your system.

7. I nternal audi o connectors (4-pi n CD, 4-pi n AUX)

These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card.

		Right Audio Channel			Right Audio Channel
		Ground			Ground
		Ground			Ground
		Left Audio Channel			Left Audio Channel
	CD			AUX
(black)			(White)

Internal Audio Connectors

Enable the CD-IN function in the audio utility when using this connector.

ASUS Vintage V2-PE2 4-