SATA Channel 2, 3 Master

While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press <Enter> to display the SATA device information.

Phoenix - Award BIOS CMOS Setup Utility

SATA Channel 2 Master

IDE Auto-Detection

[Press Enter]

Select Menu

Extended IDE Drive

[Auto]

Item Specific Help

Access Mode

[Auto]

To auto-detect the HDD’s

Capacity

20021 MB

size, head... on this

Cylinder

38792

channel

 

Head

16

 

Precomp

0

 

Landing Zone

38791

 

Sector

63

 

: Move Enter:Select

+/-/PU/PD:Value F10:Save&Exit ESC:Exit F1:General Help

F5: Previous Values

F6: Fail-Safe Defaults

F9: Optimized Defaults

Extended IDE Drive [Auto]

Select [Auto] to automatically detect a SATA hard disk drive. If automatic detection is successful, Setup program automatically fills in the correct values for the remaining fields (including Capacity, Cylinder, Head, Precomp, Landing Zone, Sector) on this sub-menu. Configuration options: [None] [Auto]

Access Mode [Auto]

Allows the user to select the sector addressing mode. Configuration options: [Large] [Auto]

Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk.

Capacity

Displays the auto-detected hard disk capacity. This item is not configurable.

Cylinder

Shows the number of the hard disk cylinders. This item is not configurable.

5-12

Chapter 5: BIOS setup