5.7Power Management Setup

The Power Management Setup menu items allow you to change the settings for the Advanced Power Management (APM) and Advanced Configuration and Power Interface (ACPI).

Phoenix - Award BIOS CMOS Setup Utility

Power Management Setup

 

ACPI Function

 

[Enabled]

Select Menu

 

ACPI Suspend Type

 

[S3(STR)]

Item Specific Help

 

Off by Power Button

 

[Instant-Off]

 

 

Resume by PCI PME

 

[Disabled]

Enable/Disable ACPI

 

Resume by Ring

 

[Disabled]

support for operating

 

Resume by USB (S3)

 

[Enabled]

system.

 

Resume by Alarm

 

[Disabled]

 

x

Date (of Month) Alarm

 

0

 

x

Time (hh:mm:ss) Alarm

 

0 : 0 : 0

 

 

State after Power Failure

[Off]

 

 

: Move Enter:Select

+/-/PU/PD:Value F10:Save&Exit

ESC:Exit F1:General Help

 

F5: Previous Values

 

F6: Fail-Safe Defaults

F9: Optimized Defaults

ACPI Functi on [Enabl ed]

Allows you to enable or disable the ACPI support for the operating system. Configuration options: [Enabled] [Disabled]

ACPI Suspend Type [ S3(STR)]

Allows you to select the ACPI state used for system suspend. Configuration options: [S1(POS)] [S3(STR)]

Off by Power Button [I nstant-Off]

When set to [Instant-Off], the system goes to soft-off when you press the power button for less than 4 seconds. When set to [Delay 4 Sec], press the power button for more than 4 seconds to power off the system. Configuration options: [Instant-Off] [Delay 4 Sec]

Resume by PCI PME [ Di sabl ed]

Enables or disables system wake-up by power management event (PME). Configuration options: [Disabled] [Enabled]

5-20

Chapter 5: BIOS setup