3 Chapter

DRAM READ to READ Delay(DD) [Auto]

Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]

DRAM READ to READ Delay(DR) [Auto]

Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]

DRAM READ to READ Delay(SR) [Auto]

Configuration options: [Auto] [4 DRAM Clock] [6 DRAM Clock]

DRAM WRITE to WRITE Delay(DD) [Auto]

Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]

DRAM WRITE to WRITE Delay(DR) [Auto]

Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]

DRAM WRITE to WRITE Delay(SR) [Auto]

Configuration options: [Auto] [4 DRAM Clock] [6 DRAM Clock]

3.5.13CPU Voltage Control [Manual]

[Manual]

Allows you to set a fixed CPU voltage.

[Offset]

Allows you to set the Offset voltage.

 

The following ten (10) items are adjusted by typing the desired values using the numeric

 

keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the value.

 

To restore the default setting, type [auto] using the keyboard and press the <Enter> key.

3.5.14CPU Voltage [Auto]

Allows you to set the CPU VCore voltage. The values range from 0.85000V to 2.10000V* with a 0.00625V interval.

•Refer to the CPU documentation before setting the CPU Vcore voltage. Setting a high VCore voltage may damage the CPU permanently, and setting a low VCore voltage may make the system unstable.

•The value [2.10000V] of the CPU Voltage item is supported only if the OV_CPU jumper is enabled. Otherwise the maximum voltage supported is [1.70000V]. See CPU / DRAM Bus overvoltage settings on page 2-23 for details.

3.5.15CPU PLL Voltage [Auto]

Allows you to set the CPU PLL voltage. The values range from 1.80V to 2.50V with a 0.02V interval.

3.5.16QPI/DRAM Core Voltage [Auto]

Allows you to set the QPI/DRAM Core voltage. The values range from 1.20000V to 1.60000V with a 0.00625V interval.

3-16

Chapter 3: BIOS setup