3 Chapter
Allows you to select the Marvell 9128 controller operating mode.
[Disabled] | Disables the controller. |
[IDE Mode] | Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as |
| Parallel ATA physical storage devices. |
[AHCI Mode] | Set to [AHCI Mode] when you want the SATA hard disk drives to use the |
| AHCI (Advanced Host Controller Interface). The AHCI allows the onboard |
| storage driver to enable advanced Serial ATA features that increases |
| storage performance on random workloads by allowing the drive to |
| internally optimize the order of commands. |
Allows you to enable or disable the JMB 36x ATA controller.
Configuration options: [Disabled] [Enabled]
If you want to use the full functin of the JMB 36x ATA contorller (ex. AHCI), we recommend that you set this item to [Enabled] and install the JMicron JMB36X Controller Driver from the motherboard support DVD.
JMB 36x OptionRom [Enabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable or disable the OptionRom of the JMB 36x ATA controller.
Configuration options: [Enabled] [Disabled]
OptionRom Display in POST [Enabled]
This item appears only when you set the JMB 36x OptionRom item to [Enabled] and allows you to display or hide the OptionRom of the JMB 36x ATA controller during POST. Configuration options: [Enabled] [Disabled]
OptionRom Detect Time Out [Auto]
This item appears only when you set the JMB 36x OptionRom item to [Enabled] and allows you to select the time out value for detecting the OptionRom.
Configuration options: [Auto] [1 Sec] [2 Sec] [6 Sec]
Serial Port1 Address [3F8/IRQ4]Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Chapter 3: BIOS setup |