3 Chapter
CPU Upper Temperature [70ºC/158ºF]
Sets the upper limit of the CPU temperature.
Configuration options: [40ºC/104ºF] [50ºC/122ºF] [60ºC/140ºF] [70ºC/158ºF] [80ºC/176ºF] [90ºC/194ºF]
CPU Fan Max. Duty Cycle [100%]
Sets the maximum CPU fan duty cycle. When the CPU temperature reaches the upper limit, the CPU fan will operate at the maximum duty cycle.
Configuration options: [20%] [30%] [40%] [50%] [60%] [70%] [80%] [90%] [100%]
CPU Lower Temperature [40ºC/104ºF]
Displays the lower limit of the CPU temperature.
CPU Fan Min. Duty Cycle [20%]
Sets the minimum CPU fan duty cycle. When the CPU temperature is under 40ºC/104ºF, the CPU fan will operate at the minimum duty cycle.
Configuration options: [00%] [10%] [20%] [30%] [40%] [50%] [60%] [70%] [80%] [90%] [100%]
Chassis Q-Fan Control [Disabled]
[Disabled] | Disables the Chassis |
[Enabled] | Enables the Chassis |
Chassis Fan Profile [Standard]
This item appears only when you enable the Chassis
[Standard] | Sets to [Standard] to make the chassis fan automatically adjust depending |
| on the chassis temperature. |
[Silent] | Sets to [Silent] to minimize the fan speed for quiet chassis fan operation. |
[Turbo] | Sets to [Turbo] to achieve maximum chassis fan speed. |
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Select Ignored if you do not want to detect this item.
3.7.7EuP Ready [Disabled]
[Disabled] | Disables the Energy Using Products (EuP) Ready function. |
[Enabled] | Allows BIOS to switch off some power at S5 state to get system ready for |
| the EuP requirement. When set to [Enabled], power for WOL, WO_USB, |
| audio and onboard LEDs will be switched off at S5 state. |
Chapter 3: BIOS setup |