Audio LED Switch [Auto]
[Auto] | The audio LEDs only light up when the system is fully powered and |
| operating. |
[Disabled] | The audio LEDs does not light up. |
[Enabled] | The audio LEDs always light up at the S0 (Working), S3 (Sleep), S5 |
| (Soft off) states. The LEDs do not light up at the S5 state when the |
| ErP Ready item is enabled. |
[Auto] | The SATAEXPRESS_E1 slot is disabled when there is a device on |
| installed on PCIEX4_1 slot. Set this option to x2 mode or x4 mode when |
| the installed PCIe device is higher than x4 interface. |
[X2 Mode] | Runs at x2 mode with USB3_E12 enabled. The SATAEXPRESS_E1 is |
| disabled. |
[X4 Mode] | Runs at x4 mode for a high performance support with USB3_E12 and the |
| SATAEXPRESS_E1 is disabled. |
[Disabled] | Disables the PCIEX4_1 slot. The USB3_12 and SATAEXPRESS_E1 are |
| enabled. |
[X4 Mode] | Runs at x4 mode for system resource flexibility. M.2 runs at x4 mode. |
[X8 Mode] | Runs at x8 mode for a high performance support with M.2 disabled. |
Set the PCIEX16_5 slot bandwidth to X8 mode for a higher performance of the
ASMedia USB 3.0 Controller [Enabled]
This item allows you to enable/disable the ASMedia® USB 3.0 controller of your system. Configuration options: [Disabled] [Enabled]
The following item appears only when you set the ASMedia USB 3.0 Controller to [Enabled].
ASMedia USB 3.0 Battery Charging Support [Disabled]
This item allows you to enable/disable the ASMedia® USB 3.0 battery charging support of your system.
Configuration options: [Disabled] [Enabled]
Chapter 3
ASUS |