The following items appear only when you set the Fast Boot to [Enabled].
SATA Support [All Devices]
[All Devices] | All devices connected to SATA ports are available during POST. |
| This process extends the POST time. |
[Hard Drive Only] | Only hard drives connected to SATA ports are detected during |
| POST. |
[Boot Drive Only] | Only boot drives connected to a SATA ports are detected during |
| POST. |
USB Support [Partial Initialization] | |
[Disabled] | All USB devices will not be available until OS boot up for a |
| fastest POST time. |
[Full Initialization] | All USB devices will be available during POST. This process will |
| extend the POST time. |
[Partial | For a faster POST time, only USB ports with keyboard and |
Initialization] | mouse connections will be detected. |
Network Stack Driver Support [Disabled]
[Disabled] | Select to skip the network stack driver from loading during POST. |
[Enabled] | Select to load the network stack driver during POST. |
3 Chapter
DirectKey (DRCT) [Enabled]
[Disabled] | Disables the DirectKey button. The system will only power on or off when |
| you press the DirectKey button. |
[Enabled] | Allows the system to power on and go to the BIOS Setup directly when you |
| press the Reset button. Connect the |
| buton cable to the onboard DRCT header. |
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot] | Accelerates the boot speed on the next boot after an AC power loss. |
Boot Logo Display [Auto] | |
[Auto] | Sets the boot logo to display during POST. |
[Full Screen] | Sets the boot logo display in full screen during POST. |
[Disabled] | Disables the boot logo display during POST. |
The following item appears only when you set the Boot Logo Display to [Auto] and [Full Screen].
Chapter 3: BIOS setup |