1 Chapter
Code | Description |
A1 | IDE Reset |
A2 | IDE Detect |
A3 | IDE Enable |
A4 | SCSI initialization is started |
A5 | SCSI Reset |
A6 | SCSI Detect |
A7 | SCSI Enable |
A8 | Setup Verifying Password |
A9 | Start of Setup |
AA | Reserved for ASL (see ASL Status Codes section below) |
AB | Setup Input Wait |
AC | Reserved for ASL (see ASL Status Codes section below) |
AD | Ready To Boot event |
AE | Legacy Boot event |
AF | Exit Boot Services event |
B0 | Runtime Set Virtual Address MAP Begin |
B1 | Runtime Set Virtual Address MAP End |
B2 | Legacy Option ROM Initialization |
B3 | System Reset |
B4 | USB hot plug |
B5 | PCI bus hot plug |
B6 | |
B7 | Configuration Reset (reset of NVRAM settings) |
B8– BF | Reserved for future AMI codes |
D0 | CPU initialization error |
D1 | System Agent initialization error |
D2 | PCH initialization error |
D3 | Some of the Architectural Protocols are not available |
D4 | PCI resource allocation error. Out of Resources |
D5 | No Space for Legacy Option ROM |
D6 | No Console Output Devices are found |
D7 | No Console Input Devices are found |
D8 | Invalid password |
D9 | Error loading Boot Option (LoadImage returned error) |
DA | Boot Option is failed (StartImage returned error) |
DB | Flash update is failed |
DC | Reset protocol is not available |
Chapter 1: Product introduction |